Technical data

254 Chapter 17
LTE-FDD Programming Commands
Adjacent Channel Power (ACP)
LTE-FDD Programming Commands
Adjacent Channel Power (ACP)
This section provides the remote control SCPI commands for the LTE-FDD Adjacent Channel Power
(ACP) measurement from within the List Sequencer. This measurement is available only if you have the
LTE-FDD measurement application licensed on the test set.
For more detailed information about the ACP measurement, refer to the online help associated with the
LTE-FDD measurement application, which is also available in PDF format (“User’s and Programmer’s
Reference”) on the Agilent website, www.agilent.com/find/e6640a.
You can also refer to the measurement guide for the X-series LTE-FDD measurement application, which
is available on the AAgilent website, www.agilent.com/find/mxa.
Adjacent Channel Power (ACP) measurement SCPI commands
There is a set of SCPI commands available to program the LTE-FDD ACP measurement when it is used
in the LTE-FDD mode. To set up the LTE-FDD measurements from within the Sequence Analyzer mode
you need to prefix the SCPI commands with LSEQuencer:LTE. For example, the
[:SENSe]:ACPower part of the ACP SCPI commands are replaced with
[:SENSe]:LSEQuencer:LTE:ACPower.
The following commands are used to set up the ACP measurement.
[:SENSe]:LSEQuencer:LTE:ACPower:BANDwidth[:RESolution]
[:SENSe]:LSEQuencer:LTE:ACPower:BANDwidth:SHAPE
[:SENSe]:LSEQuencer:LTE:ACPower:BANDwidth:TYPE
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:COUNt
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:REFerence
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:RCARrier:AUTO
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:RCFrequency
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:RCFrequency:AUTO
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2[:POWer]
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:AUTO[:STATe]
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:CPSD
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:LIST:COUPle
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:LIST:PPResent
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:LIST:WIDTh
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:LIST:BANDwidth[:INTegration]
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:LIST:METHod
[:SENSe]:LSEQuencer:LTE:ACPower:CARRier[1]|2:LIST:FILTer:ALPHa