Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsComputer AccessoriesE6640A EXM
61626364656667686970
Chapter 5 63
Mode Parameters
Mode and Measurement Parameters
Mode Parameters
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:PHASe:SHIFt? <integer>,<integer>?
TD-SCDMA Phase Shift Detection
Phase Shift Detection in Channel Configuration setting for TD-SCDMA mode. For more details about
the command see the TD-SCDMA online help (or in pdf format, the User’s and Programmer’s
Reference).
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:PHASe:SHIFt:DETection:AUTO ON|OFF|1|0
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:PHASe:SHIFt:DETection:AUTO?
TD-SCDMA Demod – Timing Reference
Timing Reference setting for TD-SCDMA mode. The available selections include DwPTS, UpPTS and
Trigger. For more details about the command see the TD-SCDMA online help (or in pdf format, the
User’s and Programmer’s Reference).
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:TREFerence DPTS|UPTS|TRIG
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:TREFerence?
TD-SCDMA Demod – Filter Alpha
Filter Alpha setting for TD-SCDMA mode. It specifies the measurement filter (Root-raised Cosine)
alpha. For more details about the command see the TD-SCDMA online help (or in pdf format, the User’s
and Programmer’s Reference).
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:ALPHa <real>
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:ALPHa?
TD-SCDMA Demod – Active Slot Threshold
Active Slot Threshold setting for TD-SCDMA mode. It specifies the Active Slot detection threshold.
The unit is dBc (dB below the slot with the largest measured power). For more details about the
command see the TD-SCDMA online help (or in pdf format, the User’s and Programmer’s Reference).
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:THReshold:SLOT <real>
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:THReshold:SLOT?
TD-SCDMA Demod – Active Channel Threshold
Active Channel Threshold setting for TD-SCDMA mode. Active Channel Threshold lets you set the
threshold above which a code channel is detected active and included in the Composite Reference
waveform. The units are dBc (dB below the total power within the Analysis Timeslot). For more details
about the command see the TD-SCDMA online help (or in pdf format, the User’s and Programmer’s
Reference).
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:THReshold:CHANnel <real>
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:THReshold:CHANnel?
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:THReshold:CHANnel:AUTO ON|OFF|0|1