User`s guide

Base Station Emulator Mode 3
E6651A User’s Guide 47
Power Control Setting parameter
The available menu functions are as follows:
•RNG-RSP msg. - Adjust Power Adjust value of RNG- RSP
message, one of Power Control methods of the E6651A.
• Power Control IE - Adjust Power Adjust value of Power
Control IE message, one of Power Control methods of the
E6651A.
• FPC msg. - Adjust Power Adjust value of FPC message,
one of Power Control methods of the E6651A.
•PMC-RSP msg. - Adjust Power Adjust value of PMC- RSP
message, one of Power Control methods of the E6651A. Or
select power control mode.
•NI IE - Select “NI IE” value. “NI IE” is “UL noise and
interference level IE” which is used in Open Loop Power
Control and broadcast from the BS.
•EIRP - Select EIRP value. EIRP is BS's “Equivalent
isotropic radiated power” and is basic information to
determine the SS Tx Power.
•EIRxP_IRmax - Select EIRxP_IRmax value. EIRxP_IRmax
is the BS maximum received power in Equivalent
isotropic and is basic information to determine the SS Tx
power.
Power Control Test Mode menu
E6651A provides four power control methods:
• RNG- RSP MAC Message - Controls the SS Tx power in
0.25 dB steps.
• Power Control IE - Controls the SS Tx power in 0.25 dB
steps.
• FPC MAC Message - Controls the SS Tx power in 0.25
dB steps.
• PMC_RSP MAC Message - Controls the SS Tx power in
0.25 dB steps.