User`s guide

60 E6651A User’s Guide
4 Signal Analyzer Mode
Test Mode
Selection
Use this option to select the mode as SA, SG or SA + SG
(BSE) Mode. When BSE mode is selected from the Mode Menu,
SA + SG mode is automatically set.
Clock Source Use this option to select either the Internal Clock (INT) or
the External Clock (EXT) as the reference clock.
Connect E6655A Use this option to connect or disconnect the E6655A Lab
Application. The E6655A is an optional PC Application used
for quality and performance measurement of application
services.
Trigger Display the Trigger Menu to select either Single Mode or
Continuous Mode. In Single Mode, a single set of input data
are captured and analyzed. In this mode, use and
options on the Trigger Menu or press Pause on the
Front Panel to control data capture and analysis. In
Continuous Mode, input data is continuously captured and
analyzed until the program is manually paused.
I/Q Reverse Use this option to swap the I and Q output.
Update The Test Set provides ease of use software upgrade. Connect
the memory device which contains upgrade software to USB
port. Press and the Test Set downloads the software
from the memory device and the upgrade is executed
automatically.
Pause
Restart
Update