Technical data

Chapter 4 127
Two Port Insertion Loss
Measuring Two Port Insertion Loss
Two Port Insertion Loss
NOTE If you prefer to have an electronic copy of the location information, see “Saving
Data” on page 469.
Setting Average, Sweep, and Restart
Setting the Sweep
You can select either continuous or single sweep. Continuous sweep provides
repeated, ongoing measurements. Single sweep performs a single measurement that
is repeated only when you push the Single button.
To Set Sweep:
Setting Averaging
You can choose to have Averaging On or Off, and to set the number of averages you
2 On [Show GPS
Location] select
On.
Displays GPS satellite location information. Uses the
internal GPS to capture the location of a
measurement. The GPS information can be used to
return to the same location. The Time Ref
(Freq/Chan/Time Ref mode) button must be set to
Internal GPS for this function to be active.
Information logged includes latitude, altitude
(feet/meters), and the number of satellites tracked.
Each time you press this softkey, the selected option
changes.
3 Highlight [On] Toggle to [On] to display GPS satellite location
information. Toggle to [Off] to remove the location
information
Step Notes
Step Notes
1 [Average/Sweep]
2 [Continuous] or [Single] Each time you press this softkey, the
selected option changes.