Technical data

Chapter 7 189
CDMA Analyzer
Using the CDMA Analyzer
CDMA Analyzer
NOTE The key labelled “Update Interval” was labelled “Capture Interval” in earlier
versions of the software (v.04.00 or earlier). The way the key works has not
changed. Only the key label has changed to clarify what the key does.
5 If desired set the update interval:
a. [Update Interval]
b. Enter the interval number of
seconds using the numeric
keypad.
c. Select [sec] or [Max Speed].
Allows you to set the update interval to 0,
1, or more seconds. Alternatively, you
may set it to automatically determine the
update interval that provides the
maximum data collection speed.
If you need to return to the automatically
determined maximum capture speed, you
must press [Update Interval] followed by
a numeric keypad key to access [Max
Speed].
6 If desired set the display color:
a. [Palette]
b. Select [Full Color] or
[Grayscale].
The color/grayscale top and bottom
mappings are determined by the Ref
Level and Scale/Div settings. To change
the mapping, go to [Level/Location] and
change [Ref Level] and [Scale/Div].
Step Notes