Technical data

192 Chapter 7
CDMA Analyzer
Optional CDMA Tx Analyzer Measurement Settings
CDMA Analyzer
Setting the Frequency/Time Reference
This key is used to specify the source of your frequency reference, or your
frequency and time reference. The analyzer needs an accurate reference signal in
order to make accurate measurements, and this is where you specify the source of
this reference signal.
Step Notes
1. [PN Inc]
2. Enter the PN Increment using
the numeric keypad.
The maximum value you can enter is 15.
3. [Enter] Notice (and verify) that the number you
entered for your chosen PN Increment
number appears below the
PN Inc text on the
corresponding button.
Step Notes
1. [Fr/Time Ref] The frequency/time reference form is
displayed