Technical data

198 Chapter 7

CDMA Analyzer

Optional CDMA Tx Analyzer Measurement Settings

CDMA Analyzer

NOTE These two steps can be performed in any order. However, if you turn averaging on

and a large number of averages has previously been set, there may be a delay before

you can change number of averages.

Setting Restart

When you have averaging turned

On and you are in Continuous Sweep mode, you

can restart the averaging by pressing the Restart menu key. The Restart key has no

effect if you are in

Single sweep mode.

To restart averaging:

Adding a Marker

Markers can be used on traces to help you visually track up to four signals. Each

marker has the following settings:

• Type: Provides three options, including:

• Off

• Normal, which places a diamond-shaped, colored marker, along with a

number, 1-4, on the trace.

• Delta, is associated with a normal marker. Therefore, a normal marker must

exist prior to creating the delta marker. The delta marker displays the

2 Set averaging On or Off.

a. [Average/Sweep]

b. [Averaging]

c. [Off] or [On]

Step Notes

1 [Average/Sweep]

2 [Restart] This key is unavailable or has no effect when

Sweep is set to Single. To restart a Single

Sweep measurement, press [Single].