Technical data

Chapter 7 207
CDMA Analyzer
Optional CDMA Tx Analyzer Measurement Settings
CDMA Analyzer
Setting the Measurement Delta Page Power Limits
Step Notes
1 On [Δ Page Pwr Limits]
select
On or Off.
Enables you to toggle the measurement limits
function On (active) and Off (inactive).
• If set to
On, the delta page power metrics will
change from blue to red (fail) or green (pass)
and indicate either a “P” (pass) or “F” (fail). If
the measured value exceeds the upper limit or
lower limit, ALL PASS, in the bar at the bottom
of the screen, will change to FAILURE.
• If set to
Off, the time delta page power value
will be displayed in blue. If NO limits are set to
On, the pass/fail bar will not be displayed at the
bottom of the screen.
2 Set the upper delta limit.
a. [High Limit]
b. Enter the number on
the numeric keypad.
c. [dB]
Delta Limit range: –150 to 100 dB
3 Set the lower delta limit.
a. [Low Limit]
b. Enter the number on
the numeric keypad.
c. [dB]
Delta Limit range: –150 to 100 dB