Technical data

Chapter 1 21
Getting Started
Introduction
Getting Started
• DC Bias output (internal, available on the E7495B only)
You can store trace data from Return Loss and Distance to Fault measurements on a
Windows XP PC for later analysis. This analysis software is a free download from
the Agilent web site at http://www.agilent.com/find/e7495_software.
In Getting Started, you will learn how to set up the E7495A/B, and you will learn to
perform one basic measurement to start getting familiar with the range of tools
contained in the test set.
If you are a new user, also recommended is E7495A Quick Basics, an HTML-based
tutorial available on the CD that comes with the test set.
After the Getting Started chapter, you will find, in alphabetical order, one chapter on
each E7495A/B measurement. General information on batteries, caring for the
E7495A/B, and how to return the instrument for service follows.