Technical data

Chapter 8 223
CDMA Over Air
Using the CDMA Over Air Tool
CDMA Over Air
11 Verify that on [Fr/Time
Ref]
GPS is selected. If
not, press [Fr/Time Ref],
then press [GPS].
12 On [PN Offset] select
Auto
or
Manual.
The test set defaults to Auto mode.
• In Auto mode the test set finds the PN offset
of the strongest pilot signal and displays the
value in the metrics display. The delay is
derived from the found PN offset.
• In Manual mode you must enter the PN
offset using the numeric keypad. The delay
is derived from the entered PN offset.
13 [Level/Location]
14 [RF IN Loss]
15 Set the RF IN Loss to 0 dB
using the numeric keypad.
16 [dB]
17 Connect to the antenna.
Step Notes