Technical data

Chapter 8 225
CDMA Over Air
Using the CDMA Over Air Tool
CDMA Over Air
NOTE If you prefer to have an electronic copy of the location information, see “Saving
Data” on page 469.
2 On [Show GPS
Location] select
On.
Displays GPS satellite location information. Uses the
internal GPS to capture the location of a
measurement. The GPS information can be used to
return to the same location. The Time Ref
(Freq/Chan/Time Ref mode) button must be set to
internal GPS for this function to be active.
Information logged includes longitude, latitude,
altitude (feet/meters), and the number of satellites
tracked.
Every time you press [Show GPS Location], the GPS
location display alternates between On and Off.
Step Notes