Technical data

Chapter 9 263
Channel Scanner
Using the Channel Scanner
Channel Scanner
Performing a Basic Channel Scanner Measurement)
Step Notes
1 Select Channel Scanner.
a.
Mode
b. [Spectrum Analyzer/Tools]
c. [Channel Scanner]
2 Select the channel standard.
a. [CS Chan Std]
b. Select the standard using the up
and down arrow buttons.
c. [Select]
3 On [CS Units] select
Chan. Each time you press this softkey, the
selected option changes.
4 On [Scan Mode] select
Range. Each time you press this softkey, the
selected option changes.
5 Select the start channel.
a. [Start Chan]
b. Enter the start channel using
the numeric keypad.
c. [Fwd] or [Rev]
6 Enter the CS step size.
a. [CS Step Size]
b. Enter the step size using the
numeric keypad.
c. [Enter]