Technical data

Chapter 9 271
Channel Scanner
Using the Channel Scanner
Channel Scanner
To Select the Custom Format Type:
3. Select the format you want.
a. [Format List]
b. Select the standard using the up
and down arrow buttons.
c. [Select]
This selection is independently of the
channel standard selected under
[Freq/Chan], [CS Chan Std].
Step Notes
1 [Format/BW]
2 On [Format Type] select
Cust. Each time you press this softkey,
the selected option changes.
Each channel standard has an
associated modulation format.
With this method, the optimum
measurement bandwidth and
measurement time for the
modulation format are
automatically selected when you
set the channel standard. For
example, when you select
GSM-950 as the channel
standard, with this method the
test set selects the bandwidth
and time for the GSM format.
4 Set the channel power measurement
bandwidth and measurement time.
a. [Meas BW]
b. Enter the bandwidth on the numeric
keypad.
c. [GHz] or [MHz] or [kHz] or [Hz]
d. [Meas Time]
e. Enter the time on the numeric keypad.
f. [ms]