Technical data

Chapter 1 29
Getting Started
Unpacking the E7495A/B Test Set
Getting Started
Option 270 Interference Analyzer Interference Analyzer
Option 300 DC Bias DC Bias
(Available on the E7495B Analyzer only)
Option 330 Nortel CDMA Software Nortel CDMA Base Station Test Software
(Requires Option 200 cdmaOne/CDMA2000
OTA, Option 510 CW & complex modulation
source, and Option 600 Power Meter)
Option 500 CW Signal Generator CW Signal Generator
Option 510 CW & Complex
Modulation Signal
Generator
CW/cdmaOne/CDMA2000 reverse link signal
generator
Option 51B Return to Agilent for repair
Option 50C Return to Agilent for calibration
Option 600 Power Meter Power Meter
(Requires 8482A/8481A or N8482A/N8481A
with Option CFT power sensor), includes:
• One 3-meter (10 ft) power sensor cable
(pn E9288-60002)
Option 700 T1 Analyzer T1 Analyzer, includes:
• Y-bantams to alligator, 3-meter (10-foot)
cable (pn 8121-1026)
• Y-bantams to RJ-45, 3-meter (10-foot) cable
(pn 8121-1025)
• Y-bantams to Y-bantams, 3-meter (10-foot)
cable (pn 8121-1024)
Option 710 E1 Analyzer E1 Analyzer, includes:
• Balun, 75 - 120 ohm adapter (0950-4551)
• 75 ohm BNC, four connectors, 3-meter
(10-foot) cable (quantity 2) (8121-1228)
Option
Number
Description (as printed
on the analyzer rear
panel)
Detailed Description