Technical data

332 Chapter 12
GSM and EDGE Analyzer
Using the GSM Analyzer and the EDGE Analyzer
GSM and EDGE Analyzer
8 If you selected Range or
Auto, you may set Start and
Stop frequency/channel and
the Step Size of the display
range.
a. On [Start Chan] enter the
channel or frequency
using the numeric
keypad.
b. On [Stop Chan] enter the
channel or frequency
using the numeric keypad
c. On [Step Size] enter the
channel or frequency step
using the numeric keypad
Menu keys label will read “Chan” or “Freq”
depending on the Units you have selected.
9 If you selected
List, you may
select and change any or all
of the available Freqs/Chans
on the List screen.
a. [List]
b. Highlight the list item
you want using the up
and down arrow buttons.
c. Enter a new Freq./Chan.
d. Repeat steps b and c as
necessary.
e. [OK]
In addition, you may add Freqs/Chans to the
list or delete Freqs/Chans from the list. Refer
to “Adding or Deleting a List Item” on
page 342.
10 Press [Display].
Step Notes