Technical data

348 Chapter 12
GSM and EDGE Analyzer
Optional GSM and EDGE Tx Analyzer Measurement Settings
GSM and EDGE Analyzer
Setting the Reference Level
You can adjust the absolute amplitude represented by the top graticule line on the
display (the reference level). Also, you can set the units per vertical graticule
division on the display. When [Autoscale] is selected, [Ref Level] and [Scale/Div]
are automatically calculated and any manually entered values will be reset.
To Set the Reference Level:
Setting Scale/Division
You can use [Scale/Div] to determine the spacing of the graticule lines on your
display.
To Set the Scale/Division:
Using GPS for Frequency Reference and Location Information
You can use GPS Location data to verify your location and to provide an accurate
frequency reference.
To Display GPS Location Information:
Step Notes
1 [Level/Location]
2 Enter the reference level
using the numeric keypad,
the up and down arrows, or
the knob.
3 [dBm] or [W]
Step Notes
1 [Level/Location]
2 [Scale/Div]
3 Enter the graticule spacing
value using the numeric
keypad
4 [dB]