Technical data

364 Chapter 12
GSM and EDGE Analyzer
Optional GSM and EDGE Tx Analyzer Measurement Settings
GSM and EDGE Analyzer
Setting the 95th Percentile EVM Limit
You can set an upper 95th Percentile Error Vector Magnitude Limit for your
Measurement results.
If 95%tile EVM Limit is turned On, and your measured 95th Percentile EVM is
below the limit you have specified, the numeric results reported in the metrics
portion of the screen will be displayed in green, and the Limit Pass will be indicated
by “(P)” after the result. If your measured 95th Percentile EVM is above your
specified limit, the numeric result reported in the metrics portion of the screen will
be displayed in red, and the Limit Failure will be indicated by “(F)” after the results.
To Set the Peak Phase Error Limit:
2 [Peak EVM Limits]
3 [Limits]
4 [On] or [Off]
5 Set the high limit.
a. [High Limit]
b. Enter the number on
the numeric keypad.
c. [%]
Step Notes
1 [Setup]
2 [95%tile EVM Limits]
3 [Limits]
4 [On] or [Off]
Step Notes