Technical data

404 Chapter 15
Signal Generator
Using the Signal Generator
Signal Generator
Performing a Basic Signal Generator Measurement
1xEV-DO Rev Link 9.6Kb
15PN Data (ARB)
(Firmware A.04.00 to
A.06.00)
–48.5 dBm –96.5 dBm –29.5 dBm –96.5 dBm
1xEV-DO Rev Link 9.6Kb
15PN Data (ARB)
(Firmware A.06.10 or
above)
–49.3 dBm –97.3 dBm –30.3 dBm –97.3 dBm
1xEV-DO Rev A Rev
Link 9.6Kbps 15PN Data
(ARB)
–50.5 dBm –98.5 dBm –31.5 dBm –98.5 dBm
1xEV-DO Rev A Rev
Link 460.8Kbps 15PN
Data (ARB)
–51.7 dBm –99.7 dBm –32.7 dBm –99.7 dBm
iDEN 1/6th Inbound
(ARB)
–52.1 dBm –100.1 dBm –33.1 dBm –100.1 dBm
a. Power accuracy is reduced at CW power levels greater than –23 dBm,
that is, with power levels between –23 dBm and –5 dBm. The message,
“Source output unleveled > –23 dBm” is displayed to warn you of this.
E7495A E7495B
Signal Max.
Power
Min. Power Max.
Power
Min.
Power
Step Notes
1
Mode
2 [Spectrum Analyzer/Tools]
3 [Signal Generator]
4[Chan Std]