Technical data

Chapter 16 415
Spectrum Analyzer
Using the Spectrum Analyzer
Spectrum Analyzer
Performing a Basic Spectrum Analyzer Measurement
Step Notes
1 Select Spectrum Analyzer.
a.
Mode
b. [Spectrum Analyzer/Tools]
c. [Spectrum Analyzer]
2 Enter the channel standard.
a. [Freq/Chan]
b. [Chan Std]
c. Select the standard using the up and
down arrow buttons.
d. [Select]
e. On [Units] select
Chan.
Each time you press the [Units]
menu key, the selected option
changes between
Freq (frequency)
and
Chan (channel number).
3 Enter the channel number.
a. [Channel]
b. Enter the channel number using the
numeric keypad.
c. Select [Fwd] or [Rev].
4 Set the span.
a. [Span]
b. Enter the frequency using the
numeric keypad.
c. [Hz], [kHz], [MHz], or [GHz]
5 Connect to the base station.