Technical data

434 Chapter 16
Spectrum Analyzer
Using the Spectrum Analyzer
Spectrum Analyzer
16 Set the first segment
width value.
a. On [Segments] select
1st
b. [Span]
c. Enter the number on
the numeric keypad.
d. [GHz], [MHz],
[kHz], or [Hz]
17 Set the lower limit.
a. On [Limits] select
Lower
b. Repeat steps 4
through 16 as
appropriate for the
number of segments
you need.
Maximum Lower Limit: dBm to –150 dBm. If an
Upper Limit is set, the Lower Limit should be set
lower than the Upper Limit)
Step Notes