Technical data

Chapter 16 439
Spectrum Analyzer
Using the Interference ID Measurement
Spectrum Analyzer
Using the Interference ID Measurement
Use the Interference ID measurement to find and identify interference signals over a
designated spectrum. This measurement requires that Option 270 - Interference
Analyzer be installed on your instrument. Interference ID provides you with a list of
possible signal types for a designated signal. For example, a selected interference
signal might be indicated as a possible CW or a CDMA signal. This measurement
does not demodulate the signals. Therefore the list is not definitive. The list retains
some history to help identify intermittent signals. The history can be reset with the
[Average] [Restart] menu keys.
Performing a Basic Interference ID Measurement
Step Notes
1 Select Spectrum Analyzer.
a.
Mode
b. [Spectrum Analyzer/Tools]
c. [Spectrum Analyzer]
2 Enter the channel standard.
a. [Chan Std]
b. Select the standard using the up and
down arrow buttons.
c. [Select]
d. On [Units] select
Chan.
Each time you press the [Units]
menu key, the selected option
changes.
3 Enter the channel number.
a. [Channel]
b. Enter the channel number using the
numeric keypad.
c. Select [Fwd] or [Rev].