Technical data

446 Chapter 16
Spectrum Analyzer
Using the Occupied BW Measurement
Spectrum Analyzer
4 Set the span.
a. [Span]
b. Enter the frequency using the
numeric keypad.
c. [Hz], [kHz], [MHz], or [GHz]
Refer to the note above.
Use [Setup] [Res BW] to ensure the
RBW is set between Span/255 &
Span/127.
5 Turn on Averaging.
a. [Span]
b. Enter the frequency using the
numeric keypad.
c. [Hz], [kHz], [MHz], or [GHz]
Use [Average/Sweep] to set
Averaging ON, set to Running
Average or Group Average, and set
Average number to 50 or greater.
6 Connect to the base station.
Out of service connection
Step Notes