Technical data

Chapter 17 479
Basic System Operations
Saving, Recalling, and Deleting Instrument States
Basic System Operations
Recalling the State
Returning the Power-Up State to Factory default
3 Enter the state name,
“Power up” (the test
set is case-sensitive,
so be sure to
capitalize the “P”).
This is the name the test set uses to identify the
power-up state.
4[Ok]
Step Notes
1 [Recall State]
2 Select from the list
the state you want to
recall.
Use the rotary knob or the up and down arrow
buttons to select the state you want to delete.
All states, in addition to two supplied in the test set,
are displayed:
• Powerup - The default power-up state shipped
with the test set, or the power-up state last saved
with the test set.
• Factory Defaults - The default power-up state
shipped with the test set. You can always revert to
it by selecting it in this procedure.
3[Select]
Step Notes
1 [Recall State]
2 Select Factory Defaults
from the list.
Use the rotary knob or the up and down arrow
buttons to select the state you want to delete.
Step Notes