Technical data

48 Chapter 2
One Port Insertion Loss
Measuring One Port Insertion Loss
One Port Insertion Loss
Step Notes
1 Mode
2 [Antenna/Cable]
3 [One Port Insertion Loss] The one port insertion loss
measurement takes a few seconds to
load.
4 [Start Freq]
5 Enter the start frequency using the
numeric keypad.
6 [Hz], [kHz], [MHz], or [GHz]
7 [Stop Freq]
8 Enter the stop frequency using the
keypad.
The stop frequency should be larger
than the start frequency.
9 [Hz], [kHz], [MHz], or [GHz]