Technical data

514 Chapter 18
T1 Analyzer
Making T1 Measurements
T1 Analyzer
Turning on sound
You can listen to a single channel at a time in channel test mode. Sound is disabled
when you are in full T1 test mode.
To Turn On the Sound
10 Select a pattern.
a. [Pattern]
b. Use the up and down
buttons to select.
c. QRSS
d. [Select]
11 Setup Tx LBO.
a. [Tx LBO]
b. [0 dB]
This is a typical level found at the customer
demarcation point.
Step Notes
1. [Mode]
2. [Backhaul]
3. [T1 Analyzer]
4. [Get Started/Test Mode]
5. Select a measurement.
6. Select Channel mode.
7. [Display/Sound]
8. [Sound]
9. [On] or [Off] Each time you press this softkey, the
selected option changes.
Step Notes