Technical data

Chapter 20 581
W-CDMA or W-CDMA (with HSDPA) Over Air
Using the W-CDMA or W-CDMA (with HSDPA) Over the Air Tool
W-CDMA or W-CDMA (with HSDPA)
Over Air
NOTE The test set itself does not record data for post-processing. It provides a snapshot of
W-CDMA or W-CDMA (with HSDPA) base station transmit parameters at that
location.
NOTE During a W-CDMA or W-CDMA (with HSDPA) over the air measurement, a
yellow triangle symbol may temporarily appear beside “GPS” in the lower right.
The yellow triangle indicates that the test set is re-synching with the GPS pulse per
second signal. Once the test set is synchronized, a green dot appears in place of the
triangle. If the GPS is unavailable, a red X appears. If this happens, you must choose
another reference.
Displaying Location Information Using GPS
If you are making W-CDMA or W-CDMA (with HSDPA) over the air
measurements at a location you previously established as valid, Agilent
recommends using GPS to verify that you are at the location from which you
previously measured.
If you are making W-CDMA or W-CDMA (with HSDPA) over the air
Step Notes