Technical data

Chapter 20 593
W-CDMA or W-CDMA (with HSDPA) Over Air
Optional W-CDMA or W-CDMA (with HSDPA) Over the Air Measurement
Settings
W-CDMA or W-CDMA (with HSDPA)
Over Air
Optional W-CDMA or W-CDMA (with HSDPA) Over
the Air Measurement Settings
You can alter several optional measurement parameters in W-CDMA or W-CDMA
(with HSDPA) Over the Air:
• “Setting the Channel or Frequency Step” on page 595
• “Setting the Scrambling Codes” on page 596
• “Setting the Transmitter Reference” on page 596
• “Setting Average, Sweep, and Restart” on page 598
• “Setting the Active Channel Threshold Level and Auto Threshold Level” on
page 600
• “Setting Measurement Time” on page 601
• “Resetting Amplifier Capacity and Traffic Metrics” on page 602
• “Setting Valid Measurement Limits” on page 603
• “Setting the S-CCPCH Parameters” on page 603
• “Setting the PICH Parameters” on page 604
• “Adding a Marker” on page 606
Displaying the Active Code Channel Table
This display option enables you to look at a numeric and textual description of all
the active code channels in your signal. The table of active channels is displayed on
the left of the graphic area of the screen. The full graphic display of all 512 channels
is reduced in size and displayed to the right of the table.
Step Notes
1[Display]
2 [Active Code Ch Table] When you press the Active Code Ch
Table key, a fresh menu is displayed.