Technical data

Chapter 20 595
W-CDMA or W-CDMA (with HSDPA) Over Air
Optional W-CDMA or W-CDMA (with HSDPA) Over the Air Measurement
Settings
W-CDMA or W-CDMA (with HSDPA)
Over Air
Figure 20-5 The Active Code Channel Table Display (with Option 245 Installed)
Setting the Channel or Frequency Step
You can set the channel or frequency step so you can quickly increment to the next
channel or frequency using the Up Arrow and Down Arrow buttons.
Step Notes
1 [Freq/Chan/Time Ref]
2 [Chan Step] or [Freq Step] This choice depends on the [Units] mode you
are using.
3 Enter the desired channel or
frequency step using the
numeric keypad.
4 [Enter] Notice (and verify) that the number you
entered is displayed below the Chan Step or
Freq Step text on the corresponding button.