Technical data

Chapter 20 599
W-CDMA or W-CDMA (with HSDPA) Over Air
Optional W-CDMA or W-CDMA (with HSDPA) Over the Air Measurement
Settings
W-CDMA or W-CDMA (with HSDPA)
Over Air
• Control Channel Graph
The following measurements are unaffected by setting Averaging On or Off. They
are always averaged up to a maximum count of 32768:
• Utilization
• Peak Utilization
• Average Utilization
• Amplifier Capacity
• Peak Amplifier Capacity
• Average Amplifier Capacity
The following measurements are never averaged:
• CDP Trace
• Scramble Code Scanner Trace
• Threshold
To set averaging:
NOTE These two steps can be performed in any order. However, if you turn averaging on
and a large number of averages has previously been set, there may be a delay before
you can change number of averages.
Step Notes
1 Set the number of averages.
a. [Average]
b. Enter the number of averages
using the numeric keypad.
c. [Enter]
2 Set averaging On or Off.
a. [Average/Sweep]
b. [Averaging]
c. [Off] or [On]