Technical data

60 Chapter 3
1xEV-DO Analyzer and Over Air Test
Accessing 1xEV-DO Tx and Over Air Test
1xEV-DO Analyzer and Over Air
Test
Accessing 1xEV-DO Tx and Over Air Test
The 1xEV-DO Analyzer & Over Air Test (Option 205) can, as its name suggests, be
used to perform both Tx Analyzer and over-the-air tests.
You can access both the 1xEV-DO Analyzer and the 1xEV-DO Over Air Test either
by pressing [Tx Analyzer], then [1xEV-DO Analyzer] or by pressing [Over Air],
then [1xEV-DO Over Air]. It is worth noting, however, that you are using the same
measurement software in either case.
If you access the measurement through the Tx Analyzer submenu, the Over the Air
features will be turned Off. If you access the measurement through the Over Air
submenu, the Over the Air features will be turned On. Any of these Over the Air
settings can be changed at any time. This means you can easily perform Over the Air
measurements after selecting [Tx Analyzer], [1xEV-DO Analyzer], and equally, you
can perform Tx Analyzer measurements after selecting [Over Air], [1xEV-DO Over
Air]. This will often be faster and more convenient method of switching between the
TX Analyzer and the Over the Air Analyzer.