Technical data

Chapter 20 603

W-CDMA or W-CDMA (with HSDPA) Over Air

Optional W-CDMA or W-CDMA (with HSDPA) Over the Air Measurement

Settings

W-CDMA or W-CDMA (with HSDPA)

Over Air

Setting Valid Measurement Limits

The Valid Measurement Setting allows you to set the Multipath Power and Pilot

Dominance limits. These settings control will help the test set to determine if valid

over the air measurements are being made.

Setting the S-CCPCH Parameters

The S-CCPCH (Secondary Common Control Physical Channel) Setting allows you

enable S-CCPCH, set the spread factor, and designate the channel number. The

S-CCPCH settings help the test set determine which channel is the S-CCPCH

channel. Once the test set has identified this channel, it can perform the delta power

measurements for this channel and display them to the you.

Step Notes

1[Setup]

2 [Valid Meas Settings]

3 Set Multipath Power

limit.

a. [Mp Pwr <]

b. Enter the power

level using the

numeric keypad.

c. [dB]

4 Set Pilot Dominance