Technical data

634 Chapter 21
Safety and Regulatory Information and Specifications
E7495A/B Base Station Test Set Specifications
Safety and Regulatory Information
and Specifications
Maximum input power without damaging
instrument (applies to Port 1 and Port 2):
100 W (with external attenuator)
1 W (without attenuator)
Frequency and time reference:
Can use internal timebase or external
signal:
GPS (external antenna supplied)
Even second; pulse
1.000 MHz:
2.048 MHz:
4.950 MHz:
10.000 MHz:
13.000 MHz:
15.000 MHz:
19.6608 MHz:
≥ 0 dBm (E7495B only)
≥ 0 dBm (E7495B only)
≥ 0 dBm (E7495B only)
≥ 0dBm
≥ 0 dBm (E7495B only)
≥ 0 dBm (E7495B only)
≥ 0dBm
Display:
Scale:
Number of points:
Number of divisions:
1 to 20 dB / div. Settable in 1 dB increments.
256
10
40 dB Attenuator:
Frequency range:
Attenuation accuracy:
Max power:
DC to 3000 MHz
±0.5 dB
50 dBm (100 W)
Spectrum Analyzer / Tools
Input frequency range (E7495A):
Input frequency range (E7495B):
10 MHz to 2500 MHz (usable to 500 kHz)
10 MHz to 2700 MHz (usable to 500 kHz)
Reference level range: –150 to +100 dBm
Dynamic range: +50 dBm to –150 dBm
(with supplied external 40 dB attenuator) (30 Hz RBW)
Table 1 E7495A/B Base Station Test Set General Specifications