Technical data

94 Chapter 3
1xEV-DO Analyzer and Over Air Test
Optional 1xEV-DO Tx and Over Air Analyzer Measurement Settings
1xEV-DO Analyzer and Over Air
Test
MAC channels when you are testing CDP Type MAC 64 or CDP Type
MAC 128, and for the Pilot channel when you are testing CDP Type Pilot.
If you have set
Max Inactive Ch Limits to be Off, the maximum inactive channel
power is reported on the front panel with no indication of whether this is a good
or a bad result. If you have set
Max Inactive Ch Limits to be On, the measured
inactive channel power level is tested against the High MAC Limit or the High
Pilot Limit (depending on your specified CDP Type), and either “F” (for a fail),
or “P” (for a pass) is also displayed against the measurement.