Specifications

34
□ 85131G
1
single, semi-rigid: 3.5 mm (f) to 3.5 mm (m),
53 cm, 21 inches
□ 85131H
1
single, flexible: 3.5 mm (f) to 3.5 mm (m),
62.2 cm, 24.5 inches
□ 85134C
1
single, semi-rigid: PSC-3.5 mm (f) to 2.4 mm (f),
81 cm, 32 inches
□ 85134D
1
set, semi-rigid:
One 2.4 mm (f) to PSC-3.5 mm (f), 53 cm, 21 inches,
p/n 85134-60002
One 2.4 mm (f) to PSC-3.5 mm (m), 53 cm, 21 inches,
p/n 85134-60001
□ 85134E
1
single, flexible: PSC-3.5 mm (f) to 2.4 mm (f),
96 cm, 38 inches
□ 85134F
1
set, flexible:
One 2.4 mm (f) to PSC-3.5 mm (f), 53 cm, 21 inches,
p/n 85134-60004
One 2.4 mm (f) to PSC-3.5 mm (m), 53 cm, 21 inches,
p/n 85134-60003
□ 85134G
1
single, semi-rigid: 2.4 mm (f) to PSC-3.5 mm (m),
53 cm, 21 inches
□ 85134H
1
single, flexible: 2.4 mm (f) to PSC-3.5 mm (m),
53 cm, 21 inches
□ N4419A-B20 set of 4, flexible: 3.5 mm (m) to 3.5 mm (f),
91.4 cm, 36 inches
□ Z5623A-B20 set of 4, flexible: 3.5 mm (m) to 3.5 mm (m),
91.4 cm, 36 inches (phase-matched)
Adapter sets
□ 85130D 3.5 mm
1
to 3.5 mm
For devices with Type-N connectors
Mechanical calibration kits
□ 85054B standard: DC to 18 GHz.
Includes:
00909-60011 Type-N (m) fixed lowband load
00909-60012 Type-N (f) fixed lowband load
85054-60025 Type-N (m) short
85054-60026 Type-N (f) short
85054-60027 Type-N (m) open
85054-60028 Type-N (f) open
85054-60031 Type-N (f) to 7mm adapter
85054-60032 Type-N (m) to 7mm adapter
85054-60037 Type-N (f) to Type-N (f) adapter
85054-60038 Type-N (m) to Type-N (m) adapter
85054-80010 Type-N (f) sliding load
85054-80009 Type-N (m) sliding load
85054-60050 Type-N (f) connector gage
85054-60052 Type-N (f) gage master
85054-60051 Type-N (m) connector gage
85054-60053 Type-N (m) gage master
□ 85054D economy: DC to 18 GHz.
Includes:
85054-60025 Type-N (m) short
85054-60026 Type-N (f) short
85054-60027 Type-N (m) open
85054-60028 Type-N (f) open
85054-60031 Type-N (f) to 7mm adapter
85054-60032 Type-N (m) to 7mm adapter
85054-60037 Type-N (f) to Type-N (f) adapter
85054-60038 Type-N (m) to Type-N (m) adapter
85054-60046 Type-N (m) fixed load
85054-60047 Type-N (f) fixed load
Adapter sets
□ 85130C 3.5 mm
2
to Type-N
Electronic calibration kits
□ N4431B Microwave ECal: 300 kHz to 13.5 GHz, 4-ports.
Includes:
Option 020 module with:
N4431-60007 4 x Type-N (f) ECal module
N4431B-xxx mixed-connector options:
Connector Port A Port B Port C Port D
type option option option option
3.5 mm (f) 101 201 301 401
3.5 mm (m) 102 202 302 402
Type-N 50 ohm (f) 103 203 303 403
Type-N 50 ohm (m) 104 204 304 404
7-16 (f)
1
105 205 305 405
7-16 (m)
1
106 206 306 406
□ N4432A Microwave ECal: 300 kHz to 18 GHz, 4-ports.
Includes:
Option 020 module with:
N4432-60003 4 x Type-N (f) ECal module
N4432A-xxx mixed-connector options:
Connector Port A Port B Port C Port D
type option option option option
3.5 mm (f) 101 201 301 401
3.5 mm (m) 102 202 302 402
Type-N 50 ohm (f) 103 203 303 403
Type-N 50 ohm (m) 104 204 304 404
□ N4690B Microwave ECal: 300 kHz to 18 GHz, 2-ports.
Includes:
Option M0F module with:
N4690-60001 Type-N (f) to Type-N (m) ECal module
Option 00M module with:
N4690-60002 Type-N (m) to Type-N (m) ECal module
Option 00F module with:
N4690-60003 Type-N (f) to Type-N (f) ECal module
Option 00A adds:
85054-60037 Type-N (f) to Type-N (f) adapter
85054-60038 Type-N (m) to Type-N (m) adapter
Cables
2
Use the test port cables recommended for devices with 7 mm
connectors, and 7 mm to Type-N adapters that are from the
85054B/D Type-N calibration kit (see 7 mm connector section).
1. Special rugged female connector specifically for connecting to the
network analyzer test port, but does not mate with a standard
male connector.
2. For use with E8362C.