Instruction manual

128 Chapter 5
Replaceable Parts
Ordering Information
Ordering Information
To order a part in the replaceable parts lists, quote the Agilent Technologies part number,
indicate the quantity required, and address the order to the nearest Agilent Technologies
Sales Office.
To order a part not listed in the replaceable parts lists, include the instrument model
number, the description and function of the part, and the quantity of parts required. Address
the order to the nearest Agilent Technologies Sales Office.
Direct Mail Order System
Within the USA, Agilent Technologies can supply parts through a direct mail order system.
There are several advantages to this system:
• Direct ordering and shipping from the Agilent Technologies parts center in California,
USA.
• No maximum or minimum on any mail order. (There is a minimum amount for parts
ordered through a local Agilent Technologies Sales Office when the orders require
billing and invoicing.)
• Prepaid transportation. (There is a small handling charge for each order.)
• No invoices.
In order for Agilent Technologies to provide these advantages, please send a check or
money order with each order.
Mail order forms and specific ordering information are available through your local
Agilent Technologies Sales Office. Addresses and telephone numbers are located in a
separate document shipped with the manuals.
Exchange Assemblies
Under the rebuilt-exchange assembly program, certain factory-repaired and tested
assemblies are available on a trade-in basis. These assemblies are offered al lower cost than
a new assembly, but meet all factory specifications required of a new assembly.
The defective assembly must be returned for credit under the terms of the rebuilt-exchange
assembly program. Any spare assembly stock desired should be ordered using the new
assembly part number.