Instruction manual

200 Appendix A
Manual Changes
Manual Changes
Manual Changes
To adapt this manual to your E5061A/E5062A, refer to Table A-1 and Table A-2.
Agilent Technologies uses a two-part, ten-character serial number that is stamped on the
serial number plate (Figure A-1). The first five characters are the serial prefix and the last
five digits are the suffix.
Figure A-1 Serial Number Plate Example
Table A-1 Manual Changes by Serial Number
Serial Prefix or Number Make Manual Changes
Table A-2 Manual Changes by Firmware Version
Version Make Manual Changes
A.02.00 or later Change 1