Instruction manual

220 Appendix C

Firmware Update

Required Equipment

• E5061A or E5062A (with keyboard and mouse).

• Four blank floppy disks (DOS format).

How to make E5061A/E5062A Firmware Installation Disk

The following is the procedure to make the E5061A/E5062A Firmware Installation Disk.

Step 1. Copy the following files from Agilent Technologies web site to the four floppy disks using

your computer’s FDD.

• disk1(1 of 4)-- e5062.msi, e506201.cab

• disk2(2 of 4)-- e506202.cab

• disk3(3 of 4)-- e506203.cab

• disk4(4 of 4)-- e506204.cab

Step 2. Assign the Label name as follows using the properties of your computer’s Windows

Explorer as shown in Figure C-1.

• DISK_1 (for disk1)

• DISK_2 (for disk2)

• DISK_3 (for disk3)

• DISK_4 (for disk4)

Figure C-1 Windows Explorer (example)

1. Insert the disk1(1 of 4) into the FDD of your computer.

2. On the Windows Explorer, click 3 1/2 Floppy [A:] and confirm the files.

3. Right click on 3 1/2 Floppy [A:], then click Properties. The Properties dialog box

appears.

4. Enter the Label name in the Label box of properties dialog box (General) for the disk1