Instruction manual
224 Appendix D
Computer Virus Check
Computer Virus Check
Computer Virus Check
The E5061A/E5062A should be protected against computer viruses. If you need to check
the system of E5061A/E5062A for computer viruses, it’s recommended that an external PC
installed anti-virus software is used to access E5061A/E5062A’s built-in drive (C and D)
via LAN and perform virus scan.
The E5061A/E5062A has no virus function nor anti-virus software installed. The Windows
operating system installed in this instrument is customized for more effective operation.
Installing Windows-based software (including anti-virus software) for ordinary PCs into
this instrument may affect the behavior of the instrument during measurement.
Required equipment
• E5061A or E5062A (with keyboard and mouse).
• An external PC installed anti-virus software such as “Norton AntiVirus”.
• A crossed LAN cable (It enables the peer-to-peer communication between the
E5061A/E5062A and the PC.)
How to check the drive C and D of E5061A/E5062A
The following is an example procedure to check the drive C and D of E5061A/E5062A
using the external PC.
Step 1. Set up the E5061A/E5062A for file sharing.
1. Connect the E5061A/E5062A to the PC using the crossed LAN cable.
2. Press key.
3. Press
Misc Setup - Network Setup - Network Configuration. The Network and
Dial-up Connections window will appear.
Figure D-1 Network and Dial-up Connections window
4. Double-click the Local Area Connection icon (1 in Figure D-1) in the Network and
dial-up connections window to enable the network connection function. The Local
Area Connection Status dialog box appears. Click the
Properties button.