Instruction manual

30 Chapter 2
Performance Tests
Instruction for Using the Performance Test Software
calibration is automatically set by the power meter from the sensor calibration table
you selected.
Running the Performance Tests
The program file name is “PerformanceTest.vba”. To perform the performance test for the
E5061A/E5062A, execute the program in accordance with the following procedure.
Step 1. Connect a mouse and an external keyboard to the E5061A/E5062A’s rear panel connectors,
then turn the E5061A/E5062A on.
Step 2. Insert the program disk.
Step 3. Press key.
Step 4. Press
Load Project to select Load Project function. "Open" dialog box as shown below
appears.
Figure 2-4 Open dialog box
Step 5. Select "User [A]" from menu in the "Look in:" box.
Step 6. Click "PerformanceTest.vba" program file.
Step 7. Click "Open" button to download the test program.
Step 8. Press
Select Macro to select Select Macro function.
Step 9. Press
Module1 main to open the Module1 main program file. "E5061A/62A Performance
Test Program" dialog box (Main Menu) as shown below will appear.
Figure 2-5 Performance Test Program dialog box