Instruction manual
Chapter 2 31
Performance Tests
Instruction for Using the Performance Test Software
2. Performance Test
Step 10. To exit the program, click "Exit" button.
Program Overall
Instrument
Information The option and serial number for the E5061A/E5062A, and test date
can be entered automatically.
Test Conditions The test conditions, “Temperature”, “Humidity” and person doing the
test (“Tested by”) can be entered.
Test Items The following test can be selected. To execute the test you select, click
“Execute” button.
• Frequency Accuracy Test
• RF Output Level Accuracy Test
• RF Output Level Linearity Test
• Trace Noise Test
• Crosstalk & System Dynamic Range Test
• Dynamic Accuracy (Magnitude) Test
• Uncorrected System Performance Test
When each test is executed, the test dialog box is displayed. The
following screen is an example of the test dialog box.
Figure 2-6 Test dialog box
To execute the test, click “Execute” button. To return the
E5061A/E5062A performance test program dialog box (Main Menu),
click “Back to Main Menu”.
The test program will prompt you to connect cables and O/S/L
terminations to the equipment or E5061A/E5062A. Follow the
instructions as shown below on the E5061A/E5062A display for
performing the test.