Instruction manual

Chapter 3 85
Adjustment
Required Adjustment after Replacing Assembly
1. Chapter Title
2. Chapter Title 3. Adjustment
4. Chapter Title
5. Chapter Title
Required equipment for the source output power adjustment for opt. 150/250
Required equipment for the source output power adjustment for opt. 175/275
Receiver IF Range Adjustment
The purpose of this procedure is to adjust the IF range of the receiver board.
Required equipment for the receiver IF range adjustment for opt. 150/250
Required equipment for the receiver IF range adjustment for opt. 175/275
Receiver Ports Characteristics Adjustment
The purpose of this procedure is to adjust source match, directivity and tracking.
Description Recommended Model
Power Meter Agilent E4419B
Power Sensor Agilent 8482A
Description Recommended Model
Power Meter Agilent E4419B
Power Sensor Agilent 8482A
Minimum Loss Pad Agilent 11852B
Description Recommended Model
Power Splitter Agilent p/n 0955-0751
N(m)-N(m) Cable Agilent N6314A (p/n
8120-8862)
Description Recommended Model
Power Splitter 75  Agilent p/n 0955-0752
N(m)-N(m) Cable 75  Agilent p/n 8120-8898