User`s guide

330 Chapter 14
W-CDMA Downlink Digital Modulation for Receiver Test
Using W-CDMA Downlink
Figure 14-2 Physical Layer Table Editor
Each data channel can be edited to have different settings, such as different time offsets, as
required by 3GPP TS25.101, for performing some of the functional tests.
Use the arrow keys or the knob to highlight the data fields to be edited. Once a field has been
highlighted, pressing the
Edit Item softkey enables you to change the value.
Configuring the Transport Layer
The steps in this procedure build upon the previous procedure.
1. Press
Return > 5 > Enter. (Or, press the left arrow key.)
2. Press
Transport Setup > TrCH Setup.
This accesses the Downlink Transport type table editor. Refer to Figure 14-3.