User`s guide

68 Chapter 3
Basic Digital Operation
Arbitrary (ARB) Waveform Header Files
Settings column for the parameters changed in the previous steps. Remember it is the
settings in the Current Inst. Settings column that are applied to the signal generator.
Figure 3-4 shows this difference between the two columns.
Figure 3-4 Differing Values between Header and Current Setting Columns
10.Press the
Save Setup To Header softkey.
The settings from the Current Inst. Settings column now appear in the Saved Header
Settings column. The header file has been edited and the settings saved. This is shown in
Figure 3-5.
Page 2
Page 1
Values Differ between the
two Columns
Values Differ between the
two Columns