User`s guide

Chapter 3 83
Basic Digital Operation
Using the Dual ARB Player
Loading Waveform Segments from Non-Volatile Memory
Waveform segments must be in volatile memory to be edited, played individually or played
within a sequence. You will need to load segments into volatile memory whenever you cycle
the power on the ESG or an action is initiated that causes the ESG to reboot such as a new
firmware download.
1. Press
Waveform Segments > Load Store to Load.
2. Highlight the waveform segment that needs to be loaded into volatile memory.
3. Press
Load Segment From NVFM Memory.
4. Repeat steps two and three for all segments that need to be loaded into volatile memory.
Another method of loading waveform segments into volatile memory is by pressing the
Load All from NVWFM Memory softkey, but this will load all waveform segment files stored in
non-volatile memory into volatile memory.