Specifications

2-88 Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide
Using Functions ESG Family Signal Generators
3GPP W-CDMA Base Station Performance Testing Option 200
Table 2-46 Dynamic Range Transport Layer, Baseband, and RF Carrier
Configuration
Transport Layer Parameter Setting
Ref Measure Setup 12.2 kbps
Data PN9
W-CDMA Baseband Signal Parameter Setting
UE Setup Filter: RNYQ(
α
=0.220)EVM
Chip Rate: 3.840000 Mcps
Scrambling Code: 0
BBG Data Clock
Int
1
Phase Polarity Normal
W-CDMA Off/On On
W-CDMA RF Carrier Parameter Setting
Frequency 1950.0 MHz
Amplitude
−
111.00 dBm
2
RF Off/On On
Mod Off/On On
1
Set to external if using the optional base station chip clock output as the ESG’s data clock
source.
2
The amplitude of the RF output is initially set to an arbitrary value (
−
111.0 dBm), in order
to perform a BER verification measurement. After BER verification, the amplitude will
be modified to the required value (
−
91.0 dBm) in accordance with the 3GPP specification
for this performance test.