Specifications

2-92 Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide
Using Functions ESG Family Signal Generators
3GPP W-CDMA Base Station Performance Testing Option 200
ESG Configuration
This test can be performed using the default uplink W-CDMA parameter settings with the
exceptions of setting Frequency, Amplitude, Channel State, RF On/Off, and
Mod On/Off. Configure the signal generators by using the front panel hardkeys and
softkeys (or the appropriate SCPI commands) to enter the values listed in Table 2-48 and
Table 2-49.
Unless otherwise noted, values are to be entered on both signal generators.
Table 2-48 ACS Physical Layer Configuration
ESG # Channel # Parameter Setting
ESG 1 Channel 1
ESG 2 Channel 2
Channel State On
PhyCH Type DPCCH
Power
−
2.69 dB
Beta 11
TFCI Pattern 0000
Slot Format 0
Symbol Rate 15.0 ksps
FBI Pattern 00000000
Channel Code 0
TPC Pattern Up/Down
TPC Pat Steps 1
ESG 1 Channel 1
ESG 2 Channel 2
Channel State On
PhyCH Type DPDCH
Power 0.00 dB
Beta 15
Data Transport CH
Symbol Rate 60.000 ksps
Slot Format 2