Specifications

Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide 2-99
ESG Family Signal Generators Using Functions
Option 200 3GPP W-CDMA Base Station Performance Testing
Table 2-52 Blocking Characteristics Transport Layer, Baseband, and RF Carrier
Configuration
Transport Layer Parameter Setting
Ref Measure Setup 12.2 kbps
Data PN9
W-CDMA Baseband Signal Parameter Setting
UE Setup Filter: RNYQ(
α
=0.220)EVM
Chip Rate: 3.840000 Mcps
Scrambling Code: 0
BBG Data Clock
Int
1
Phase Polarity Normal
W-CDMA Off/On On
W-CDMA RF Carrier Parameter Setting
Frequency 1950 MHz (ESG 1)
1940 MHz or 1960 MHz (ESG 2)
2
Amplitude
−
111.00 dBm (ESG 1)
3
−
40.00 dBm (ESG 2)
RF Off/On On (ESG 1)
Off (ESG 2)
Mod Off/On On
1
Set to external if using the optional base station chip clock output as the ESG’s data clock
source.
2
The frequency of the unwanted signal generated at the output of ESG 2 must be
±
10 MHz
from the fundamental W-CDMA signal generated at the output of
ESG 1.
3
The amplitude of the W-CDMA stimulus is initially set to an arbitrary value (
−
111.0 dBm),
in order to perform a BER verification measurement. After BER verification, the
amplitude will be modified to the required value (
−
115.0 dBm) in accordance with the
3GPP specification for this performance test.