Specifications

2-100 Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide
Using Functions ESG Family Signal Generators
3GPP W-CDMA Base Station Performance Testing Option 200
Example Test Procedure
Follow this example procedure to perform a 3GPP W-CDMA blocking characteristics test
on your BS. Perform the subsections in this procedure sequentially, in the order in which
they appear in this document.
Subsection 1. Equipment Setup and Preliminary BER Verification
Complete the following steps to connect the equipment and perform a BER verification test
on your BS.
Figure 2-19 Blocking Characteristics Equipment Setup
1. Connect the BS to the test system as shown in Figure 2-19.
a. Using the appropriate cables, adapters, and antennae, connect the outputs of the two
ESGs, or of one ESG and RF signal generator, to the RF input ports of the signal
combiner.
b. Connect the RF output port of the signal combiner to the RF input of the BS.
c. Connect the system controller and the BER test platform to the BS.