Specifications

Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide 3-3
ESG Family Signal Generators Softkey Reference
Option 200 Numerics
Numerics
1/2 Conv
This key sets a one-half rate convolutional encoder, used for coding each
transport channel selected for uplink physical channel #2.
Softkey Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 2 > Config Transport > Transport Channel # 1 to 6 >
TrCH Setup > Coding > Edit Item > 1/2 Conv
1/3 Conv
This key sets a one-third rate convolutional encoder, used for coding
each transport channel selected for uplink physical channel #2.
Softkey Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 2 > Config Transport > Transport Channel # 1 to 6 >
TrCH Setup > Coding > Edit Item > 1/3 Conv
2 Box Setup
This key accesses a table editor from which you can select and modify
the parameters of the IQ voltage scale and scale the code domain power
to 0 dB for the two-ESG configuration. See “I/Q Voltage Scale”
on page 3-39. This is valid for the two-ESG configuration in downlink
only.
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > 2 Box Setup
10 msec
This key sets the frame clock interval to 10 milliseconds for the uplink
synchronization signal setup.
Softkey Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Uplink Sync Setup > Signal Setup > Frame Clock Interval > 10 msec
12.2 kbps (25.101 v3.5)
This key sets the downlink DPCH channel to 12.2 kbps for the reference
measurement test setup.
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > Link Control >
PhyCH Type > DPCH > Ref Measure Setup > 12.2 kbps (25.101 v3.5)